|
1. Place about three cups of the
flour in the bowl of your stand-type mixer. Add
the yeast. Carefully measure 2 cups room temperature
(80 degrees) water. The water should feel cool to
the touch. Mix the water with the flour with a dough
hook for 30 seconds or until the yeast is dissolved
and the ingredients begin to combine.
2. Add the salt, sugar, and butter
and continue mixing. Add most of the remaining flour,
the wheat gluten, and dough conditioner and continue
mixing at a medium speed for at least four minutes
adding more flour as needed to reach a soft dough
consistency. (It is important that the dough be
mixed for at least four minutes to develop the gluten.)
The dough should clear the sides of the bowl but
will be soft, not firm, to the touch.
3. Once the dough is mixed, place
it in a large greased bowl, turning once to coat
both sides, and cover with plastic wrap. Refrigerate
overnight or for up to three days.
4. On the day that you would like
to bake your bread, remove the dough from the refrigerator
and let it warm to room temperature--about three
hours. The dough should rise to nearly double in
size.
5. Once the dough has risen, form
the loaves. Coat your hands with flour and gently
form a loaf by pulling the dough around itself to
create a slightly stretched skin. You may need to
coat your hands several times if the dough is sticky.
If necessary, pinch the seams together on the bottom
of the loaf. Lay the loaf gently in a well-greased
loaf pan and cover with plastic wrap. Repeat with
the second loaf. Let double again in size, about
11/2 hours.
6. Preheat the oven to 350 degrees.
Once the dough has doubled (the loaf should be very
puffy), place the two loaves on a shelf in the top
half of the oven, well-spaced so that air can circulate
between the loaves. Bake for thirty minutes or until
done. The interior of the loaves should register
at least 185 degrees when an insta-read thermometer
is inserted through the bottom crust. Remove the
bread from the pans and cool on wire racks. Let
it cool completely before cutting.
|